Electrical Testing and Inspecting

Tomorrow is your Reward for Working Safely Today

Electrical Testing and Inspecting

Tomorrow is your Reward for Working Safely Today

Periodic Inspection and Testing

In most walks of life, things deteriorate as they get older and are used – this is true in electrical installations too. Therefore, they should be regularly checked and have electrical testing to maintain the quality of condition for use. These safety checks are commonly known as ‘periodic inspection and testing’:

A periodic inspection will…

  • Find any electrical shock risks or threats
  • Highlight any defective electrical work
  • Identify and lack of earthing or bonding
  • Show if any electrical circuits or equipment are overloaded

Once completed you will be granted an Electrical Installation Condition Report, also known as an EICR. At Protech we also test wiring and all fixed electrical equipment to check that they are safe.

We can arrange a schedule of circuits to allow you to fully understand your network.

How often do I need to have a period test completed?

Your electrics should be inspected and tested by a competent electrician every:

  • 10 years for an owner-occupied home.
  • 5 years for a rented home.
  • 3 years for a caravan.
  • 1 year for a swimming pool.

We also advise whenever you are selling your property or preparing it for a tenant that you have it tested in full.

What happens during a periodic inspection and who will be performing the inspection?

Protech Electrical engineers are fully qualified, competent and registered electricians with years of experience when it comes to dealing with periodic testing. Our team will always refer back to the UK standards for safety of electrical installations, known as BS 7671 Requirements for Electrical Installations (IEE Wiring Regulations). This applies when looking at circuits, switches, fuses or any of your electrical system. From our base here in Potters Bar, we are able to offer NICEIC testing / inspections throughout Greater London & the Surrounding areas.

electrical testing

Our in-depth electrical testing and inspection is designed to cover and give you assurance to meet the relevant criteria for the following points:

  • Making sure your earthing and bonding is done where required.
  • The suitability of the switchgear and controlgear. For example, an old fusebox with a wooden back, cast-iron switches, or a mixture of both will need replacing.
  • The serviceability of switches, sockets and lighting fittings. Items that may need replacing include: older round-pin sockets, round light switches, cables with fabric coating hanging from ceiling roses to light fittings, black switches and sockets mounted in skirting boards.
  • The type of wiring system and its condition. For example, cables coated in black rubber were phased out in the 1960s. Likewise cables coated in lead or fabric are even older and may well need replacing (modern cables use longer-lasting pvc insulation).
  • Sockets that may be used to supply portable electrical equipment for use outdoors, making sure they are protected by a suitable residual current device (RCD).
  • The presence of adequate identification and notices.
  •  The extent of any wear and tear, damage or other deterioration.
  • Any changes in the use of the premises that have led to, or may lead to, unsafe conditions.

Once complete you will be issued with an Electrical Installation Condition Report detailing any issues we may have found during the inspection. Some of these issues may be damage or deterioration and where your system does not comply with modern day requirements. We will always give you advice on the costs to remedy any of these issues found and advise on the most appropriate course of action.

If one of our team finds something we deem as potentially dangerous, we will declare the report as unsatisfactory and look to work with you as quickly as possible to remedy this issue. Our job is to make sure your home, office or property is not only periodically tested but more importantly safe, we would never leave without outlining the issues and looking for the most cost effective way to repair the issue.

Should you be looking for qualified Electricians offering NICEIC inspections and electrical testing we are here to assist you moving forward.

For more information on our electrical services please visit Electrical Services.

Our Guarantee To You

We created the Protech guarantee because we want you to put your trust in our electricians. Under this minimum six month guarantee, if anything goes wrong as a direct result of the work our electricians perform in your home or business, we will return to inspect the problem. If the fault is found to be due to our electrician’s work, we’ll fix the problem with no cost to you.

Emergency electricians on hand to deal with your electrical emergency, including any suspected electrical faults. Contact Protech and we’ll get a registered electrician out to you as soon possible.

Electrical work we do:

  • Additional sockets
  • Circuit board installs
  • Circuit breaker repairs
  • Complete and partial rewiring
  • Consumer unit replacements
  • Cooker points
  • Domestic appliances
  • Door entry systems
  • Earthing ports and bonding
  • Electric heaters
  • Electric radiators
  • Electrical fault finding
  • Electrical repairs
  • Emergency service
  • Emergency lighting
  • External lighting
  • Fuse box replacements
  • Fused spurs
  • Garden lighting
  • Heating controls
  • Immersion heaters
  • Lighting design
  • Lighting installations
  • Lighting repair
  • Lighting-low voltage
  • Portable appliance testing (PAT)
  • Power shower installations
  • Rewiring
  • Security lighting
  • Sockets
  • Switches
  • Testing and inspections
  • Towel rails
  • Transformers
  • Tripping circuits
  • Water heaters

Free Electrical Safety Checklist

Please complete form for a copy of our checklist

Great. Your Electrical Safety Checklist will be with you soon.