Posted on March 28, 2018 in Gardening
Raised flower beds are an attractive addition to your landscaping, convenient to use and the perfect solution for gardens with problem soil.
If your plants currently struggle against clay soil or poor water drainage, raised flower beds are an easy way to combat the problem. If you suffer from weak knees or a bad back, they let you enjoy gardening without the physical strain. And if your outside space is paved or shingled, raised flower beds, just like container gardening, can give you a way to introduce planting without major upheaval.
Making your own raised flower bed planter is surprisingly easy, and has a couple of distinct advantages over buying a pre-made one from your local garden centre. First, you get to decide exactly what size you want it to be – handy if your garden is on the bijou side or you have an awkward space to fill.
Second, you choose the materials – which means you decide on the perfect finish for you, and you can even use up all those off-cuts of wood you’ve got left over from other projects, making them potentially both environmentally friendly and cost effective.
Page Contents
MAKING YOUR OWN RAISED FLOWER BED
What you need:
- 2 x wooden planks for the sides
- 2 x wooden planks for the ends
- Wood screws suitable for outdoor use
- An electric drill
Note: raised flower beds should be between 6 and 12 inches high to give your plants adequate space for the roots to grow, so as a guide, the width of your planks needs to fall somewhere in this region. For flowers, the shorter end of this range will usually suffice.
Method:
- If possible, use a flat surface such as a patio, driveway or garage floor.
- Lay out your planks in a rectangle, exactly how you’re going to be fitting them together
- Take one of your end planks and place it flush against the end of one of your side planks, to form one corner of your planter
- Using your electric drill, pre-drill holes straight through your end plank and into the end of your side plank – for a six inch high planter one at the top and one at the bottom will be enough, but for anything taller add one in the middle too. (Pre-drilling reduces the chances that the wood will split, and improves the hold of the screw.)
- Repeat for all four corners of your planter, until you have something resembling flat-pack furniture – four pre-drilled planks with a corresponding screw for each hole
- Now, using the pre-drilled holes and your drill, screw the planks together, one corner at a time – and your planter is complete!
PERFECT PLACEMENT FOR YOUR RAISED FLOWER BED
Unless your raised flower bed is narrow enough that you can reach the far side easily, consider leaving a little space around it for access. Avoid any area of your garden that sees heavy footfall. When deciding where to place your raised flower bed, choose somewhere that gets a lot of sunshine year round.
Once you’ve decided where your raised bed is going, you need to prepare the area. This means clearing weeds and preferably any large rocks or stones. If using an area that is currently lawn, you can place your raised bed on top and score around it as a guide to show you exactly where you’re going to have to remove turf from.
THE BOTTOM LINE
Some gardeners prefer to line the inside of their raised flower bed with polythene to protect the wood. However, this limits the amount of root space your new plants will have – so if you want to try this, it’s advisable to make your flower bed taller than 6 inches to compensate. And don’t forget to make a few holes in the polythene for drainage!
FILLING YOUR RAISED FLOWER BED
If your existing soil is on the clay side, there’s a good chance you’ve opted for raised flower beds because they’re the perfect solution for associated problems. In that case, you can purchase compost and topsoil here.
If not, you may be able to use soil from other areas of your garden – or mix it with shop bought topsoil to limit your costs. However, be sure to prepare any soil from your garden by removing weeds, stones and small rocks, and breaking up any large clumps first.
Finally, add plant food to give your new plants a head start. And there you have it – the perfect raised flower bed, installed and ready for planting.
For information on our garden services please visit Protech Garden Solutions or call one of our friendly team on 0845 604 1288.
Categories
- Building Maintenance
- Cleaning
- Electrical
- Gardening
- General Info
- Our Service
- Pest
- Security
- Uncategorized
- Waste Solutions
Archive
- April 2024
- March 2024
- February 2024
- January 2024
- December 2023
- November 2023
- August 2023
- April 2023
- February 2023
- January 2023
- December 2022
- November 2022
- October 2022
- September 2022
- August 2022
- July 2022
- June 2022
- May 2022
- April 2022
- March 2022
- February 2022
- January 2022
- December 2021
- October 2021
- September 2021
- August 2021
- July 2021
- June 2021
- May 2021
- April 2021
- March 2021
- February 2021
- January 2021
- December 2020
- November 2020
- October 2020
- September 2020
- August 2020
- July 2020
- June 2020
- May 2020
- April 2020
- March 2020
- February 2020
- January 2020
- December 2019
- November 2019
- October 2019
- September 2019
- August 2019
- July 2019
- June 2019
- May 2019
- April 2019
- March 2019
- February 2019
- January 2019
- December 2018
- November 2018
- October 2018
- September 2018
- August 2018
- July 2018
- June 2018
- May 2018
- April 2018
- March 2018
- February 2018
- January 2018
- December 2017
- November 2017
- October 2017
- September 2017
- August 2017
- July 2017
- June 2017
- May 2017
- April 2017
- March 2017
- February 2017
- January 2017
- December 2016
- November 2016
- October 2016
- September 2016
- August 2016
- July 2016
- June 2016
- May 2016
- April 2016
- March 2016
- February 2016
- January 2016
- December 2015
- November 2015
- October 2015
- September 2015
- August 2015
- July 2015
- June 2015
- May 2015
- April 2015
- March 2015
- February 2015
- January 2015
- October 2014
- May 2013
- April 2013
- November 2011
- September 2011
- June 2011
- January 2011
- December 2010
- November 2010