Posted on December 7, 2016 in General Info
Page Contents
Slips and trips – the costs
According to statistics from the Health and Safety Executive (HSE), slips and trips are the single most common cause of injuries at work, and account for over a third of all major work injuries.
They cost employers over £512m a year in lost production and other costs and account for over half of all reported injuries to members of the public.
All employees, visitors, members of the public and contractors who are in the workplace are at equal risk. With workplace insurances only able to cover a part of the costs, the costs to employers of legal actions resulting from falls can be considerable.
Main causes of slips and trips:
The main causes of slips, trips and falls in the workplace are:
- uneven floor surfaces
- unsuitable floor coverings
- wet floors
- changes in levels
- trailing cables
- poor lighting
- poor housekeeping
- Contaminated surfaces (leaves, oil, food, ice) etc
Legal duties and obligations to prevent falls
As well as the moral duty of employers to protect employees and members of the public, General Health and Safety Legislation covers all employers and workplaces.
The regulations include obligations to protect employees and the public from risks associated with slips, trips and falls.
The following regulations also apply:
The Workplace (Health, Safety and Welfare) Regulations 1992 these regulations cover all aspects of the workplace, including a requirement that floors are suitable, in good condition and free from obstructions. People must also be able to move around the workplace safely.
To view the full text of the above legislation online, please follow the links under Legislation.
Assessing the risks of slips, trips and falls
The HSE recommend a five-step approach to risk assessment in the workplace. The risk of slips, trips and falls should always be considered:
- Look for slip and trip hazards around the workplace, including floor coverings and their condition, uneven floors, trailing cables and areas that are sometimes slippery due to spillages. Don’t forget to include any outdoor areas, remembering that weather conditions may be a factor.
- Decide who might be harmed and how. Who comes into the workplace? Are they at risk? Are some groups more at risk than others?
- Consider the risks. Are there already measures in place to deal with the risks? Are floor coverings suitable for the area and the work carried out there? What cleaning and maintenance systems are in place? Are regular inspections carried out? Are employees instructed to keep traffic routes clear?
- Record your findings if you have five or more employees.
- Regularly review the assessment. If any significant changes take place, make sure that precautions are still adequate to deal with the risks.
To help you complete a slips and trips assessment, the HSE have developed a free Slip Assessment Tool (SAT):
→ Download the HSE’s Slip Assessment Tool (external site)
Reducing the risks of slips, trips and falls
Employers have a duty to make sure they protect people in the workplace from the risks of slips, trips and falls but everyone can help to avoid such accidents.
Reducing the risks is usually easy, costs little or no money and often has other benefits:
Spillages Clean up all spillages immediately. Use a cleaning agent if required. If the floor is wet, use appropriate signs to tell people the floor is still wet and that extra care is needed. Alternatively, use another route until the spillage or wetness is gone.
Trailing cables Try to place equipment to avoid cables crossing pedestrian routes and use cable guards to cover cables where required.
Change of surface from wet to dry Ensure suitable footwear is worn, warn of risks by using signs and locate doormats where these changes are likely.
Rugs or mats Where they cannot be eliminated, make sure rugs or mats are securely fixed and that edges do not present a trip hazard.
Slippery floor surfaces Assess the cause of the slipperiness and treat accordingly, for example treat chemically and use appropriate cleaning materials and methods. In some cases you may need to repair or replace the floor surface.
Changes in level and slopes Improve visibility, lighting, provide hand rails and add tread markers or other floor markings.
Poor lighting Improve lighting levels and placement of lighting to provide a more even lighting level over all floor areas.
Footwear Ensure workers choose suitable footwear with the correct type of sole. If the work requires special protective footwear, the employer should provide it free of charge.
For information on our anti slip services please click Anti Slip Services | Anti Slip Treatments | Anti Slip Coatings | Slip Testing. For Further information on slips, trips and falls in the workplace please call 0845 604 1288.
Categories
- Building Maintenance
- Cleaning
- Electrical
- Gardening
- General Info
- Our Service
- Pest
- Security
- Uncategorized
- Waste Solutions
Archive
- April 2024
- March 2024
- February 2024
- January 2024
- December 2023
- November 2023
- August 2023
- April 2023
- February 2023
- January 2023
- December 2022
- November 2022
- October 2022
- September 2022
- August 2022
- July 2022
- June 2022
- May 2022
- April 2022
- March 2022
- February 2022
- January 2022
- December 2021
- October 2021
- September 2021
- August 2021
- July 2021
- June 2021
- May 2021
- April 2021
- March 2021
- February 2021
- January 2021
- December 2020
- November 2020
- October 2020
- September 2020
- August 2020
- July 2020
- June 2020
- May 2020
- April 2020
- March 2020
- February 2020
- January 2020
- December 2019
- November 2019
- October 2019
- September 2019
- August 2019
- July 2019
- June 2019
- May 2019
- April 2019
- March 2019
- February 2019
- January 2019
- December 2018
- November 2018
- October 2018
- September 2018
- August 2018
- July 2018
- June 2018
- May 2018
- April 2018
- March 2018
- February 2018
- January 2018
- December 2017
- November 2017
- October 2017
- September 2017
- August 2017
- July 2017
- June 2017
- May 2017
- April 2017
- March 2017
- February 2017
- January 2017
- December 2016
- November 2016
- October 2016
- September 2016
- August 2016
- July 2016
- June 2016
- May 2016
- April 2016
- March 2016
- February 2016
- January 2016
- December 2015
- November 2015
- October 2015
- September 2015
- August 2015
- July 2015
- June 2015
- May 2015
- April 2015
- March 2015
- February 2015
- January 2015
- October 2014
- May 2013
- April 2013
- November 2011
- September 2011
- June 2011
- January 2011
- December 2010
- November 2010